可调衰减器
1、 在焊接器件或引线时，最好用控温烙铁，温度保持在260℃。
2、 PCB板上要钻散热孔，并在散热孔中填充焊料。
Suggested mounting procedures:
1.Solder part or leads in place with controlled
temperature iron (260℃).
2.Drill thermal vias through PCB and fill with solder.
|
频率范围Frequency(GHz) | 衰减范围Attenuation Range (dB) | 衰减精度Attenuation Accuacy | 最大驻波比Max VSWR |
插入损耗Ins Loss |
外形尺寸Dimension(mm) | 重量（weight） |
| SJ-XTJE-2-11-162.5-SKK(Q) | DC-162.5MHZ | 0-11db in 1db steps | ±0.1dB | ≤1.60 | ≤1.1dB | 38×120 | 335g |
|
DC-2.7
|
0-60db in 1db steps | ±1.0 dB | ≤1.50 | ≤2.5dB | 38×123 | ||
| SJ-TJ-2-20-1-SKK | DC-0.79-1 | 5-20db in 1db steps | ±1.5db | ≤2.0 | 46×36.5×17.8 | ||
| DC-2.7 | 0-10db in 1db steps | ±1.0db | ≤1.40 | ≤0.6dB | 46×67.5 | 120g | |
| SJ-TJ-2-20-2.2-SJK | DC-0.8-2.2 | 5-20db in 1db steps | ±1.5dB | ≤3.1 | 50.5×36.5×17.8 | ||
| DC-6 | 0-70db in 1db steps |
±0.8dB 或 3%(≤60dB)
±1.5dB 或 3%（＞60dB）
|
≤1.65 |
≤1.8dB
|
190.5×87×79
|
